看看客戶對我們的評價。

This fiber laser cutting machine has been running mainly for our sheet metal jobs. We make a lot of small parts and brackets like these, so there are usually many different shapes in one order. The cuts come out clean and the parts fit well when we move on to bending and assembly. We have been using it for our regular fabrication work here in the UAE and so far the experience has been good. It has made this type of work much more straightforward for us.

We bought this fiber laser cutting machine mainly for tube work, and it’s been a nice upgrade for our shop. We’ve been cutting stainless steel tubes with different angles and joints, and the bevel cuts have made a noticeable difference. The parts come off the machine pretty much ready for the next step, so we’re not spending as much time cleaning up or adjusting the cuts before welding. The setup took a little time to get familiar with, but once we got our settings dialed in, the results have been very consistent. It’s been working well for the type of tube fabrication we do.

At first, we were looking more at sheet cutting, but after using it, we found the tube cutting function very useful as well. We often get jobs with different materials and shapes, so having one fiber laser cutting machine for both sheets and tubes makes things easier for our workshop. The machine has been running well for our regular work, and we are getting used to the operation quite quickly. For us, it is a practical machine for different kinds of metal cutting jobs.

La verdad, estamos muy contentos con la máquina. La usamos principalmente para cortar lámina de acero al carbono y acero inoxidable, y hasta ahora ha funcionado muy bien. Los cortes salen limpios y precisos, y la mesa de corte extraíble nos resulta muy práctica para cargar y retirar las láminas. Esto nos facilita bastante el trabajo diario y también nos ayuda a ahorrar tiempo en la preparación de cada trabajo. En general, ha sido una buena máquina para nuestro taller y estamos satisfechos con el resultado.

We have been using this fiber laser cutter for our sheet metal work in Guatemala, mainly cutting carbon steel and stainless steel. The cutting quality has been very good, especially on detailed parts and different thicknesses. The machine is also quite easy for our operators to learn, and the software makes it convenient to prepare and adjust cutting jobs. What we like most is that the cuts come out clean with very little burr, so we spend less time on additional finishing. It has been a good addition to our workshop and has helped us handle our production more efficiently.

We have been using this 4-head CNC router in our workshop in Peru for quite a while. It has been a good machine for the type of woodworking jobs we do, especially when we need to make several similar pieces. The four spindles save us quite a bit of time compared with doing everything one by one. Recently we contacted CATEK again because we needed some parts for the machine. They helped us confirm the parts we needed and arrange the order. It is good to see that they still provide support after the machine has been in use for some time. So far, we are happy with both the machine and the service.

E kemi marrë këtë makinë kryesisht sepse na duhej një zgjidhje më kompakte për prerjen e tubave. Në punishten tonë hapësira është e kufizuar, kështu që përmasat e makinës ishin një nga gjërat që morëm parasysh. Deri tani jemi të kënaqur me mënyrën se si po punon.

Zakonisht presim tuba të rrumbullakët dhe katrorë për punë metalike, konstruksione dhe parmakë. Makina është relativisht e thjeshtë për t'u përdorur dhe operatori u përshtat me të pas pak kohe. Na pëlqen gjithashtu që mbetjet e tubit janë të vogla, sepse kur kemi shumë copa për të prerë, edhe kjo bën diferencë.

Për një punishte si e jona, nuk kishim nevojë për një makinë shumë të madhe. Kjo na përshtatet mirë sepse nuk zë shumë hapësirë dhe mund ta përdorim për punë të ndryshme. Deri tani ka qenë një zgjedhje e mirë për ne.

La compramos porque necesitábamos cortar lámina y tubo y no queríamos tener dos máquinas diferentes. Hasta ahora nos ha funcionado bastante bien. Trabajamos sobre todo con acero al carbono y acero inoxidable, y hemos usado la máquina tanto para lámina como para diferentes tipos de tubo.

Lo que más nos ha servido es poder hacer los dos trabajos con el mismo equipo. Antes teníamos que organizar el trabajo dependiendo de qué máquina estaba disponible, y ahora es mucho más sencillo. Los cortes han salido bien y la máquina ha sido bastante estable. Al principio nos tomó un poco de tiempo acostumbrarnos a los parámetros y a la parte de corte de tubo, pero después de unos días los operadores ya la manejaban sin problema.

Para el trabajo que hacemos en el taller, tener corte de lámina y tubo en una sola máquina nos está resultando bastante práctico.

We’ve had the 4020 fiber laser cutting machine running in the workshop for a while now. We bought it mainly because the old setup was getting a bit slow for the amount of sheet work we were doing. The two tables are probably the most useful part for us. We can get the next sheet loaded while the other one is cutting, which saves a fair bit of messing about during a busy day.

We’ve mainly been cutting mild steel and stainless so far. The cuts have been good and, more importantly, it’s been fairly consistent from job to job. The machine is obviously a big bit of kit, so getting it into the workshop and getting everything set up took some planning, but once it was up and running it was pretty straightforward for the lads to use.

We’ve had a few questions during the setup and CATEKCNC have been responsive when we’ve needed help. Overall, it’s doing what we bought it for and has made the day-to-day cutting work a lot less of a bottleneck.

We have been using this fiber laser cutter for our sheet metal work and overall we are very satisfied with it. The shuttle table is probably the feature we use the most because we can load the next sheet while the machine is still cutting. This saves quite a bit of time during the day. The enclosed design is also a big plus for our workshop since there is much less smoke and sparks around the working area. We mainly work with carbon steel and stainless steel, and the cuts have been clean and consistent. The CATEKCNC team also helped us during installation and with the initial settings, which made things much easier. For our production, it has been a good upgrade and we are happy with the choice.

The laser cutter arrived and we installed it recently. Everything went pretty smoothly. We mainly bought it for steel and stainless steel sheet cutting. The pull-out table is useful because we can load the material from the front without too much trouble. We had a few questions when setting up the machine, and the guys from CATEKCNC helped us. We haven't used it enough yet to say too much, but the machine is running well so far. Looking forward to getting it into our normal production.

The CNC router machine has arrived and we have just finished the installation in our workshop in Ecuador. We haven’t started regular production yet, but the machine looks very solid and well built. We chose this model mainly because of the automatic tool changer and rotary axis, as we want to use it for different woodworking projects and furniture parts. The installation process went smoothly, and the CATEKCNC team has been helping us with the setup and answering our questions. So far, everything looks good and we are looking forward to starting production and testing the machine with our actual projects.